Shenzhen Tiancheng Lighting Limited company to welcome you！ National Service Hotline：4008-320-328
| What should I do if the lamp beads are moisture? |
| Time:2022-10-08 00:00:00 | view： |
|
What should I do if the lamp beads are moisture? First of all, it is possible that if the lamp beads are placed in a dark and humid place in the dark and humid place, although the surface of the LED lamp beads is equipped with anti -static bags or aluminum foil bags, it is installed, but It is still possible to be wet. Because these packaging bags cannot be fully resisting humidity, and desiccants need to be placed. The main impact of LED lamp beads after the moisture is that the lamp beads are not bright, or the dark brightness of the lamp beads is low. This is a relatively common LED lamp bead storage problem. Manufacturers can generally help customers perform secondary baking to re -use them. Lighting beads generate various abnormalities after the moisture: 1. In the case of confirming that it has been tide, it cannot be lit again, because all the moisture lamp beads are packaged and sent back to the manufacturer for secondary baking Just bake.2. LED lamp beads that have been trendy may be coupled or parallel may be burned Circuit CircuitCircle of fires, it is not recommended to use it after moisture. 3, LED lamp beads have tied to the seller in time after being tide, negotiating the relevant costs of baking. (Generally speaking, LED lamp beads are moisture to cause the buyer's own improper preservation method to cause moisture. Buyers need to pay freight). Generally speaking, the influence of LED lamp beads is mainly due to the non -brightness or darkness and no gloss, so it is recommended not to bake it yourself. |
